"Nil" with ICL Air-cooled system after its first charge of water / fluid there is hardly any necessity. The same water / fluid is being circulated in the closed circuit system and is not exposed to the atmosphere for any loss or evaporation. Temperature below freezing will require anti-freeze / glycol.

ICL Air-cooled Fluid Coolers (ACFC) are available in two-different type of series (Model : VW, PL) with unlimited combinations. The heat-transfer coils (Fin-spacing, Row-deep, Face-area, Air-velocity, Motor-power etc.) are selected on the basis of operating conditions of cooling systems.

Water-softening system is not required once the potable drinking water is filled in the fluid coolers there is no water consumption at all. This kind of water is almost easily available everywhere.

Dirt / dust may accumulate at finned surface heat-transfer coils in bad weather conditions during storm of dust in the air. Periodically dirt / dust can be washed with water pressure hose like washing a car radiator, or it can be cleaned with high pressure air if available.

"Nil" as the water filled in the system is already clean. This water being circulated again and again, without any evaporation, therefore system is scale-free and there is no need for cleaning of tubes at all.

ICL Air-cooled fluid coolers selected at highest summer ambient temperatures therefore there is no fear of any de-ration. Through our Air-cooled system full capacity of plant can be utilized at peak load conditions.

Fan motors of air-cooled fluid coolers will save substantial amount of electricity, during winter season, cool nights and mild weather conditions. These fan motors can be connected for automatic operation with water-line- thermostat, to switch on / off for saving of electricity.

ICL-ACFC - Air-cooled Process-Fluid Coolers require very little maintenance except yearly routine inspection of electric fan motors. If dirt accumulates at finned surface heat-transfer coils in bad weather conditions it can be very easilv cleaned as mentioned above.